• Wide voltage range selection – from 14 VRMS to 680 VRMS.
This allows easy selection of the correct component for
the specific application.
• High energy absorption capability with respect to size of
component.
• Response time of less than 20 ns, clamping the transient
the instant it occurs.
• Low stand-by power – virtually no current is used in the
stand-by condition.
• Low capacitance values, making the varistors suitable for
the protection of digital switching circuitry.
• High body insulation – an ochre coating provides
protection up to 2500 V, preventing short circuits to
adjacent components or tracks.
• Available on tape with accurately defined dimensional
tolerances, making the varistors ideal for automatic
insertion.
• Approved to UL 1449 edition 3 (file number: E332800) and
manufactured using UL approved flame retardant
materials.
• Completely non flammable, in accordance with IEC, even
under severe loading conditions.
• Non porous lacquer making the varistors safe for use in
humid or toxic environments. The lacquer is also resistant
to cleaning solvents in accordance with IEC 60068-2-45.